What is the Minimum Wall Thickness for my Injection Molded Parts?
High-quality injection molded plastic casing pulls your whole product together into a neat package, and any walls within your product must be stable in order to maintain its overall structure and quality.
Makers and entrepreneurs know this, so it’s not uncommon for those working with Jaycon Systems to ask what the minimum wall thickness should be for a plastic part they’d like to have made or designed.
It could be something like a fingernail slot that can easily be pried open to change a battery, for example, or something similar to the back of a cell phone with thin outer casing that looks sleek and modern, but also holds a battery in place.
If you need a thin plastic part like these but aren’t sure about the parameters of material composition, design and functionality, our CAD engineers have a few tips that can help point you in the right direction. In this article, you’ll learn more about the factors that can help you decide on the appropriate wall thickness for your product.
So, what is the minimum wall thickness required on a plastic part?
The question about how thin or thick a product’s walls or casing should be is one that only leads to more questions. Here are a few to keep in mind when first exploring the idea of wall thickness:
Is the wall used for structure?
Will the part be fragile in that section if it is made thin?
If a specific plastic material is needed, how will the thinness be affected by the material choice? (The chart below discusses this in more detail.)
Your answers to these questions, along with a few other important variables, will help you determine whether a thin wall or part will compromise the integrity of your product or if it will help it function better.
The important variables to be considered — material composition, flow rate and part yield — are key to the plastic injection molding process, so it’s helpful to know a bit more about them when deciding on wall thickness.
Material composition alone can be the distinguishing factor in wall thickness because of a material’s stiffness and strength characteristics.
Stiffness refers to when and how far a certain part will bend when force is applied, while strength refers to the part’s ability to resist fracturing or breaking when force is applied. Each material has its own stiffness and strength and both are affected by part thickness. So, as a part’s wall gets thinner, it bends more when it shouldn’t and is more susceptible to breaking.
This may sound straightforward, but in order for stiffness and strength to work in your favor, thickness must be chosen according to material composition. We elaborate on this point in the chart at the bottom of this article.
Flow rate — the rate at which a material moves or flows into a mold — is partially dependent on material composition and will make a difference in the manufacturing process.
Because pressure is required for the injection molding process, thin wall areas in a mold can cause material flow rate issues no matter what material is chosen. In turn, flow rate issues can lead to costly flaws, such as voids and sink marks.
Proper wall thickness will help you avoid extra costs that can result from the need for more pressure.Think about trying to drink a smoothie through a straw. The thinner the straw, the more pressure you’ll need to apply to suck the smoothie through the straw.
So, if you have a thin area in the mold that the plastic has to move through, you might need a larger machine that can push more pressure. That’s where it can become more expensive. If you need more than 200 tons of pressure for a machine with a range of 100–200 tons, then you’ll need to use a bigger machine, and bigger machines have higher operating costs.
Also, if you need higher pressure, the molds will need to be made of higher-quality steel and the mold bases will be larger. The increases in size will increase the price for the mold and price per part.
Voids can also develop on the inside of a part, making it look complete, but creating bubbles or hollow sections that affect the structure. Voids may not be visible from the outside. They occur because of something called short shot, which happens when a material cools before it can completely fill the mold. It’s similar to pouring too little batter into a waffle machine then closing it.
A void appears in the center image below.
The center piece shows a void on the bottom right corner that happened during resin casting, a process similar to injection molding that is performed on a small scale for prototypes.
Sink marks can also occur because of flow rate issues. They’re dimple-like areas on the surface that appear to have sunken in. Shelling, as discussed in this article on injection molding and designing for manufacturability, is used to enhance proper flow and prevent sink marks. Sink marks are also discussed in this article on engineering guidelines for injection molding.
Part yield is the ratio of good to bad parts that come out of the mold. Thin walls will contribute to low part yield, making it necessary for part yield to be considered prior to budgeting and manufacturing.
Let’s say you made four parts: two came out fine, one has a void where the material didn’t fill and one broke as it was removed. That would mean the process had a 50 percent part yield.
As the manufacturer might have to discard every other piece in order to achieve the minimum wall thickness, the costs of trial and error will fall on the person or company paying to have the part made. By keeping the wall thickness to a proper range for the chosen material, however, you can avoid unnecessary costs and delays.
Some manufacturers set a consistent wall thickness regardless of the material being used, but most will adjust accord to the material.
Recommended wall thickness for common injection molded materials
The ultimate takeaway is this: working with your manufacturer to select the proper material for your part — and the recommended thickness for that material — is the best way to ensure that the part will be produced in a cost-effective manner that enhances the quality of your product. Below are the guidelines manufacturers typically follow:
If you’re developing a hardware product that requires injection molding, Jaycon Systems can help. Injection molding is one of the most commonly used and reliable processes, and our engineers can adapt it as needed to fit your product’s specifications.
This article was published by the Jaycon team. Learn more about how we can take your product design and hardware idea to the next level here.